English
SYMBOLS
SYMBOLS NAME
Safety Alert Symbol
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Read Your Operator's Manual
Wear eye and hearing protection
Keep bystanders away
Ricochet
No blade.
RPM Decal
Boots
Gloves
No Smoking
Petrol
Oil
Mix Petrol and Oil
Switch
EXPLANATION
Wear eye and hearing protection when operating this
equipment.
Keep all bystanders at least 15m (50 ft) away.
Danger of Ricochet.
Do not install any type of blade on this unit.
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded petrol intended for motor vehicle use with an
octane rarting of 87([R+M]/2) or higher.
Use synthetic 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before
refuelling.
On/Off Switch
= ON to Run
O = OFF to Stop
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satification and safe use.
Indicates danger, warning or caution. it means attention!!!
Your safety is involved.
Fully press and release the prime bulb 8 times.
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
- 1 -
To Next Page
Loading...
Need help?
General
