Ryobi PRT100B User Manual

8 - English
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you
are assembling parts, making adjustments, changing
accessories, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that could
cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Hearing protection may also
be required depending on the type of attachment used
and as prescribed elsewhere in this Operator’s Manual.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
OPERATION
NOTICE:
To prevent damage to the spindle or spindle lock, always
allow motor to come to a complete stop before engaging
the spindle lock.
APPLICATIONS
You may use this product for the purposes listed below:
Carving, engraving, etching, polishing, cleaning, removing
rust, sanding, light grinding and sharpening
ACCESSORY STORAGE
See Figures 1 - 2, page 12.
The collet wrench and frequently used accessories can be
stored using the accessory storage.
INSTALLING/REMOVING BATTERY PACK
See Figure 3, page 12.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap into place and that battery pack is secured in the
product before beginning operation.
 Depress the latches to remove the battery pack.
For complete charging instructions, see the operator’s
manuals for your battery pack and charger.
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
FEATURES
PRODUCT SPECIFICATIONS
Quick-Change Collet ...................................................................................................................................... 1/8 in. Universal
Rated Speed .....................................................................................................................................4,400-23,000/min (RPM)

Ryobi PRT100B Specifications

General

Speed	Variable
Voltage	120 V
Base Type	Fixed
Collet/Chuck Size	1/4 inch
Power Source	Corded

Summary

General Power Tool Safety Warnings

Work Area Safety

Safety considerations for the environment where the tool is used.

Electrical Safety

Precautions related to electrical hazards and connections for the tool.

Personal Safety

Guidelines for operator safety, including protective gear and alertness.

Power Tool Use and Care

Proper usage and maintenance recommendations for power tools.

Battery Tool Use and Care

Guidelines for safely using and maintaining battery packs and tools.

Service

Instructions for obtaining qualified repair and maintenance services for the tool.

Rotary Tool Safety Warnings

Common Safety Warnings for Specific Operations

General safety rules applicable to grinding, sanding, wire brushing, and cutting operations.

Kickback and Related Warnings

Explains kickback, its causes, and how to avoid it during operation.

Specific Warnings for Grinding and Cutting-Off

Safety precautions unique to grinding and abrasive cutting-off operations.

Specific Warnings for Wire Brushing Operations

Safety measures related to using wire brushes with the rotary tool.

Additional Safety Rules

Important safety advice, including dust exposure, tool knowledge, and protective gear.

Features

Assembly

Operation

Applications

Lists the various uses and tasks the rotary tool can perform.

Accessory Storage

Information on how and where to store accessories for the tool.

Installing/Removing Battery Pack

Step-by-step instructions for inserting and removing the battery pack.

Quick-Change Collet

Details on the quick-change collet system for accessory changes.

Installing/Removing Accessories

Guidance on how to attach and detach various accessories safely.

Using Mandrels

Instructions on selecting and installing different types of mandrels.

Selecting the Right Speed

Advice on choosing the appropriate speed setting for different tasks and materials.

Slower Speeds

Specific guidance on when to use slower speed settings for certain materials.

Operating the Rotary Tool

Step-by-step guide on how to turn on, use, and turn off the rotary tool.

Maintenance

General Maintenance

Basic cleaning and upkeep procedures to keep the tool in good condition.