11
To ensure smooth operation of wheels, the wheel
assembly should be cleaned before storage.
1. Remove the covers on the rear wheel.
2. Remove the opening pins and the washers.
3. Remove the wheel and replace with new wheel.
4. Replace the washers, pins and the wheel covers.
1. Remove the covers on the rear wheel.
2. Remove the opening pins.
3. Remove the wheel and replace with new wheel.
4. Replace the pins and the wheel covers.
See gure 13.
1. Fully loosen the tension adjustment knobs on the
sides of the handle and fold the upper handle down.
2. Push inward on each side of the lower handle, and
lift the sides of the lower handle past the edges of the
handle mounting brackets. Avoid pinching or trapping
any cables.
The mower battery is designed for maximum life; however,
like all batteries, it will eventually need to be replaced.
Charge the new battery pack before use.
1. Remove the isolator key.
2. Carefully unlock and remove the battery pack.
3. Install the new battery pack.
4. Take the old battery pack to a recycling center that
accepts lead acid/lithium ion batteries. Never dispose
of battery in re or regular household trash.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
The battery contains material which is
hazardous to you and the environment. It
must be removed and disposed of separately at a facility
that accepts lithium-ion batteries.
To Next Page
Loading...
Need help?
General
