PRODUCT SPECIFICATIONS
Cordless Line Trimmer
Model RLT36X4BL RLT36BL
Voltage 36 V 36 V
No-load speed
High mode 0–5800/min 0–5800/min
Low mode 0–5100/min 0–5100/min
Cutting capacity
355 mm / 406
mm
355 mm / 406
mm
Cutting line diameter 2.4 mm 2.4 mm
Weight without battery pack 3.80 kg 3.80 kg
Weight with heaviest battery
pack
5.30 kg 5.30 kg
Vibration level (in accordance with AS/NZS 60335.2.91 Annex BB)
Front handle a
h
= 8.7 m/s²
Rear handle a
h
= 5.3 m/s²
Uncertainty of measurement K = 1.5 m/s²s
Noise emission level (in accordance with AS/NZS 60335.2.91
Annex CC)
A-weighted sound pressure
level at the operator’s position
L
pA
= 89.1 dB(A)
Uncertainty of measurement K
pA
= 3.0 dB
A-weighted sound power level
(including K
WA
)
L
WA
+ K
WA
= 101.0 dB(A)
Uncertainty of measurement K = 2.5 dB
Guaranteed sound power
level
103 dB(A)
BATTERY AND CHARGER
Model RLT36X4BL RLT36BL
Battery pack BPL3640D2 —
Charger BCL3617S —
Compatible battery
packs
BPL3626, BPL3626D, BPL3626D2,
BPL3640, BPL3640D, BPL3640D2,
BPL3650D, BPL3650D2,
BPL3620D2, BPL3660D
Compatible chargers
BCL3617S, BCL3650F, BCL3617U,
BCL3660F
REPLACEMENT PART
Replacement head RAC1214
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
