To Next Page

To Previous Page

PDM20 Series

-10-

1.4 M enu Operation

Three-class menus are:

①

Function group (first class)

②

Function code setting(second class)

③

Function code setting(third class)

Instruction: In the third class menu, pressing “MENU” or “RUN/STOP” can return

to the second class menu. The difference is that pressing “RUN/STOP” first saves

parameters to control board, and then returns to the second class menu and shifts to

next function code automatically; pressing “MENU” returns to the second class

menu directly without saving parameters and keeps staying at current function

code.

Under the third class menu, only flicker bit can be modified. Revisable bit will

shift automatically after 5 seconds.

Note: For parameters marked with “

●”, please modify them in stopped state.

Parameters marked with “

◎” are actual detected and recorded values which can’t

be modified.

Questions and Answers:

Need help?

Do you have a question about the SAJ PDM20 series and is the answer not in the manual?

SAJ PDM20 series Specifications

General