Salda Ptouch - Set points configuration

11
Number Function
Room air temperature during building protection mode.
Room air temperature during economy mode.
Room air temperature during comfort mode.
F1
F2
F3
B2
F1 F3
F2
2.8Setpoints
2
EN
I2
B3
B4
I3
I1
B1
Number Function
Set temperatures indication.
State of temperature maintaining function during building protection
mode: green strip – on; gray strip – o.
State of temperature maintaining function during economy mode:
green strip – on; gray strip – o.
I1
I2
I3
Number Function
Buttons to increase value.
Buttons to decrease value.
On/o switch for temperature maintaining function during building
protection mode.
On/o switch for temperature maintaining function during economy
mode.
B1
B4
B2
B3