Selecting Fan Mode
Select Fan mode if you want to ventilate your room. It helps to refresh
the air in your room. You can adjust the fan speed in this mode.
1
Press the (On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the button on the remote control until is displayed.
Result
:
The indoor unit beeps each time you press the button.
The air conditioner runs in Fan mode.
The temperature is set automatically.
Note You can change modes at any time.
3
Press the button to select the fan speed until the required setting is
displayed.
Low
Medium
High
Result
: Each time you press the button, the indoor unit beeps.
4
To control the airflow direction, refer to page 21.
To Next Page
Loading...
Need help?
General
