Adjusting the Airflow Direction Vertically
You can adjust the airflow direction vertically. The outer airflow blade moves up
and down to increase the efficiency of the cooling or heating operation.
1
Press the button until the required direction is set.
Result: The outer blade is adjusted vertically.
2
Press the button again to move the blade up and down automatically
during operation.
3
Press the button again to stop the blade moving up and down.
Note If you turn the air conditioner... Then the blade...
Off is closed completely.
On set to the default position.
Adjusting the Airflow Direction Horizontally
You can adjust airflow direction horizontally manually.
The inner blades with small fins move the air in the desired direction.
1
Adjust the inner blades by moving them left or right.
Make sure do not touch the inner blades during operation.
It may cause injury on your fingers.
To Next Page
Need help?
General
