45
You can adjust the LCD brightness.
- Sub menus : [Auto], [Dark],
[Normal], [Bright]
LCD brightness
You can select the image that is fi rst displayed on the LCD monitor
whenever the camera is turned on.
- Sub menus : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [RESIZE]
menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by
[Reset] menu.
Start up image
Display (
"
)
DISPLAY
LCD Save
Date&Time
LCD Bright
Back Set
OK
Language
Quick View
Start Image
Off
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
- Sub menus
[Off] : The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during
the selected time.
Quick view
If you set the [LCD save] to On and the camera isn't operated during
the specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off] : The LCD monitor will not be
turned off.
[On] : If the camera isn't operated
during the specifi ed time (about
30 SEC.), the camera power will
be idle (Camera status lamp:
Blinking) automatically.
LCD save
DISPLAY
LCD Bright
Language
Date&Time
On
Off
Back Set
OK
Start Image
Quick View
LCD Save
DISPLAY
Quick View
Date&Time
Start Image
Bright
Back Set
OK
Language
LCD Save
Dark
LCD Bright
Normal
Auto
DISPLAY
LCD Bright
Date&Time
Start Image
Back Set
OK
Language
LCD Save
Quick View
1 sec
Off
3 sec
0.5 sec
To Next Page
Loading...
Need help?
General
