Troubleshooting_ 78
7. Close the top cover. Make sure that it is securely closed.
8. Push the fuser levers downwards.
9. Open and then close the rear cover or front cover to resume printing.
Solving other problems
The following chart lists some trouble conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, contact a service representative.
Other problems include:
• See "System problems" on page 78.
• See "Power problems" on page 78.
• See "Paper feeding problems" on page 79.
• See "Printing problems" on page 80.
• See "Printing quality problems" on page 81.
• See "Common Windows problems" on page 84.
• See "Common Linux problems" on page 84.
• See "Common Macintosh problems" on page 85.
System problems
Condition Suggested solutions
The red error light is
on.
Turn the machine on/off. If the problem persists,
contact a service representative (See "Contact
SAMSUNG worldwide" on page 94”).
The machine is experiencing problems that
require service such as LSU error or fuser
error.
Power problems
Click this link to open an animation about power problems.
To Next Page
Loading...
Need help?
General