Shooting options
48
Using burst modes
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes to take multiple pictures rapidly.
The options may differ depending on the shooting mode.
• You can use the flash, timer, and ACB only when you select
Single.
• When you select Motion Capture, the resolution is set to VGA
and the ISO speed is set to Auto.
• Depending on the face detection option you selected, some
burst options are not available.
1
In Shooting mode, press [ ].
2
Select Shooting → Drive → an option.
Option Description
Single: Take a single photo.
Continuous:
• While you are pressing [Shutter], the camera takes
photos continuously.
• The maximum number of photos depends on the
capacity of your memory card.
Motion Capture:
• While you are pressing [Shutter], the camera takes
VGA photos (5 photos per second; maximum of 30
photos).
AEB:
• Take 3 photos with different exposures: normal,
underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
