Assembling & Connecting continued
Connecting Extension
Telephone or Answering
Machine (if necessary)
Plug one end of the modular cord into
the EXT.TEL jack on the rear of your
machine. Plug the other end of the cord
into a modular jack on an answering
machine or a regular telephone you wish
to use as an extension.
Connecting the Power
Plug the power cord to the power
receptacle. Plug the other end of the cord
into a properly grounded, three-pin 12OV
AC power outlet.
Use an outlet not shared with equipment
that generates electrical noise or
consumes large amounts of electricity,
such as an air conditioner or office copier.
Turning the Power “On”
Press the Power switch to turn the unit
on.
When you turn the power on, [SYSTEM
INITIAL] message appears briefly in the
display window and all indicators light
briefly. After a moment, all indicators are
turned off, and the date, time, and current
mode are displayed. (If the displayed time
and date are not correct, don’t
worry-you will change this information in
a moment. See page 13). This confirms
your unit works properly.
You may leave your unit on and in
standby mode 24 hours a day, 365 days
a year.
If nothing appears in the window, make
sure that :
l
The power cord is properly connected and
plugged into the wall jack.
l The wall jack is ‘live’ and not switched off
by a wail switch or blown fuse.
To Next Page
Loading...
Need help?
General
