installation & connection
24_ installation & connection
❖
Methods of adjustment
• The case of wall installation
①
After mounting the camera on the wall, adjust the panning angle so that the camera
faces a desired direction when tilting.
②
Adjust the Rotate position to fit the video to the screen borders.
③
Then, adjust the tilting angle so that the camera faces the monitoring direction.
• The case of ceiling installation
①
After mounting the camera on the ceiling, adjust the panning angle according to
the monitoring direction. You should adjust the panning angle lest that the video be
displayed upside down on the monitor.
②
Adjust the Rotate position to fit the video to the screen borders.
③
Then, adjust the tilting angle so that the camera faces the monitoring direction.
J
`
For smoother Rotate adjustment, set the Tilt position between 60° ~ 80°.
To Next Page
Loading...
Need help?
General
