English _25
ā INSTALLATION & CONNECTION
CONNECTING WITH OTHER DEVICE
J
`
The BNC Out terminal of the product is provided for easier installation, and is not recommended
for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to
the product.
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line (+, ā) of the power cable to the corresponding
power port of the camera.
J
`
If both PoE and DC12V are applied simultaneously, the product will be supplied with power from
PoE.
-
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
-
Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols.
-
It is advisable to use only one power source from PoE and DC12V.
Monitor to install
Ethernet
Power
To Next Page
Loading...
Need help?
General
