Menu Description Play/Stop
Coarse
Removes noise such as vertical stripes. Coarse
adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
(Available in analog mode only)
Fine
Removes noise such as horizontal stripes. If the noise
persists even after fine tuning, repeat it after adjusting the
frequency (clock speed).
(Available in analog mode only)
Sharpness
Changes the clearance of image.
(Not available in MagicColor mode of Full and Intelligent.)
H-Position
Changes the horizontal position of the monitor's entire
display.
(Available in analog mode only)
V-Position
Changes the vertical position of the monitor's entire
display.
(Available in analog mode only)
OSD
To Next Page
Loading...
Need help?
General