S&C 2010 User Manual

S&C ELECTRIC COMPANY
s
716-501
INSTRUCTION SHEET
Page 2 of 26
August 12, 2002
S&C Series 2000 Circuit-Switchers
Model 2010 — With Horizontal Interrupters and
Outdoor Transmission (69 kV through 230 kV) Vertical-Break Power-Operated Disconnect
INTRODUCTION
Ç
WARNING
The equipment covered by this publication must be installed, operated, and main-
tained by qualified persons who are knowledgeable in the installation, operation,
and maintenance of overhead electric power distribution equipment along with
the associated hazards. A qualified person is one who is trained and competent in:
•
The skills and techniques necessary to distinguish exposed live parts from
non-live parts of electrical equipment.
•
The skills and techniques necessary to determine the proper approach dis-
tances corresponding to the voltages to which the qualified person will be
exposed.
•
The proper use of the special precautionary techniques, personal protective
equipment, insulating and shielding materials, and insulated tools for working
on or near exposed energized parts of electrical equipment.
These instructions are intended only for such qualified persons. They are
not
intended to be a substitute for adequate training and experience in safety proce-
dures for this type of equipment.
Qualified Persons
Read this
Instruction Sheet
Thoroughly and carefully read this instruction sheet before installing or operating
your Series 2000 Circuit-Switcher Model 2010. Familiarize yourself with “SAFETY
INFORMATION” on page 3.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your S&C Series 2000 Circuit-
Switcher. These instructions should be stored inside the Series 2000 operator
enclosure using the instruction manual holder.
Warranty The standard warranty contained in S&C’s standard conditions of sale, as set forth in
Price Sheet 150, is applicable to the S&C Series 2000 Circuit-Switcher covered in
this instruction sheet, except that the first paragraph of said warranty is replaced by
the following:
(1) General: Seller warrants to purchaser for a period of 5 years from the date of
shipment that the equipment delivered will be of the kind and quality specified in
the contract description and will be free of defects of workmanship and mate-
rial. Should any failure to conform to this warranty appear under proper and
normal use within five years after the date of shipment the seller agrees, upon
prompt notification thereof and confirmation that the equipment has been
stored, installed, operated, inspected, and maintained in accordance with recom-
mendations of the seller and standard industry practice, to correct the noncon-
formity either by repairing any damaged or defective parts of the equipment or
(at seller’s option) by shipment of necessary replacement parts.
Replacement parts provided by seller under the warranty for the original
equipment will be covered by the original-equipment warranty for its duration.
Replacement parts purchased separately will be covered by the warranty con-
tained in seller’s standard conditions of sale, as set forth in Price Sheet 150.
Ç
CAUTION
The equipment in this publication must be selected for a specific application. The
application must be within the ratings furnished for the equipment.
Proper Application

S&C 2010 Specifications

General

Brand	S&C
Model	2010
Category	Switch
Language	English