88
77
1 61 6
1 41 4
NAMES AND FUNCTIONS OF CONTROL PANELNAMES AND FUNCTIONS OF CONTROL PANEL
99
DETERGENT IndicationDETERGENT Indication
·These are the spoon
indications of the
DETERGENT volume.
·Refer to "DETERGENT
AND LOAD
RECOMMENDATIONS"
on page 9.
·This indicator shows
remained time during
washing.
·This indicator
shows
.
·
rinsing
times and rinsing
type
“ ”means
Overflow Rinse.
(E.g.) Remaining time is 20 minutes
·This indicator shows when
the washing is finished
during presetting.
(E.g.) Finish washing 2 hours later
·When abnormal conditions
occur, the indicator will
indicate warning.
(E.g.) Water does not flow(E.g.) Washing time is 10 minutes
REMAINING
PRESET
CHILD LOCK
REMAINING
PRESET
CHILD LOCK
·
this indicator
shows
When setting SOAK and
WASH process,
the time of you set.
WATER LEVEL Button
CHILD LOCK Function
WATER LEVEL Button
CHILD LOCK Function
●You can choose the
appropriate water level
that matches the load size.
●You can set CHILD LOCK
function. Refer to CHILD
LOCK function at page 16.
●Different water levels for
washing rinsing optional.
Detailed operation please
refer to Page 15.
1515
1 61 6
TIMER and PRESET IndicatorsTIMER and PRESET Indicators
RINSE IndicationRINSE Indication
SPIN IndicationSPIN Indication
·This indicator
shows spinning
time.
·“ ”means
Cyclone Dry.
START/PAUSE ButtonSTART/PAUSE Button
·
·
·
This button can be use to start the
washer operation.
This button can also be used to
temporarily stop the washer
operation.
To restart the washer operation,
press the START/PAUSE button
again.
NOTES:
·This is not a CANCEL button.
·If you want to delete the End Buzzer, press
the START/PAUSE button and hold down for
about 4 seconds until beeping stops.
To turn the power on, press the POWER
ON/OFF. When you want to turn off the
power, press the POWER ON/OFF again.
When washing has finished, the power
will be turned off in 5 seconds
automatically. (When you Setting
Remained water Draining function, the
time is 10 minutes).
● If you leave the washer turning on without
starting the operation, the power will be
turned off in 10 minutes by itself.
·
PROCESS ButtonPROCESS Button
●The PROCESS Button can
be used to set a variety of
wash programs.
●To choose the washing course,
press COURSE button.
NOTE:
If you choose the NORMAL, HEAVY
DUTY or CUSTOM course, the washer
will automatically begin the NEURO &
FUZZY operation.
●
COURSE ButtonCOURSE Button
●Press WATER POWER button to
adjust water current during washing
or rinsing. Press it once more, the
digital indicates “ H0 (standard
water flow), H1, H2, H3, H4,
( stronger. H4 is the strongest);L1,
L2, L3, L4 (weaker, L4 is the
weakest).
●And this function could not be set
for DELICATE or BLANKET course.
WATER POWER ButtonWATER POWER Button
POWER ON/OFF ButtonPOWER ON/OFF Button
Press the SOFT SPIN button,
the light above flashes.
● After pressing SOFT SPIN,
the last 2 minutes spinning
will be soft spin, this avoid
clothes creasing.
(This function cannot be
operated the DELICATE
and BLANKET course.)
SOFT SPIN ButtonSOFT SPIN Button
●Press this button to
preset the finish
time of washing.
●The number
indicated means the
finishing time of
washing.
●Preset function
could not be used
for DELICATE
course.
1 31 3
PRESET ButtonPRESET Button
1 21 2
1 41 4
(E.g.) Cyclone Dry 1 hour
Lighting on during Cyclone Dry
(E.g.) Overflow Two times Rinse
Lighting on during Overflow Rinse
1 51 5
To Next Page
Need help?
General
