Sanyo CM2472A User Manual

Cooling Characteristics
(RH : 46%, Indoor fan speed : High fan)
(230V, 60Hz)
(1) Low pressure performance chart
(2) Operating current performance chart
(3) Indoor discharge air performance chart
• This performance chart shows operation of a single wall-mounted indoor unit. The performance chart will vary depending on
 the indoor unit type.
• Check each performance value in test-run mode. Electrical performance values represent a combined indoor/outdoor value.
 (In this case, be sure to stop all the indoor units where performance is not being checked.)
• The performance is for a tubing length of 24.6t (7.5m). If the tubing length is different, the performance chart will vary.
NOTE
Low pressure at wide tube service valve
psig (MPaG)
Outdoor air temperature °F (°C)
174
(1.2)
188
(1.3)
160
(1.1)
146
(1.0)
77
(25)
86
(30)
95
(35)
104
(40)
Lo fanHi fan HH fan
Operating current (A)
Outdoor air temperature °F (°C)
4
5
3
2
Lo fanHi fan HH fan
Indoor discharge air temperature °F (°C)
Outdoor air temperature °F (°C)
46.4( 8)
68.0(20)
64.4(18)
60.8(16)
57.2(14)
53.6(12)
50.0(10)
Lo fanHi fan HH fan
Outdoor Unit CM1972A Indoor Unit KMS0772 × 1
5-1-1. Temperature Charts (CM1972A)
77
(25)
86
(30)
95
(35)
104
(40)
77
(25)
86
(30)
95
(35)
104
(40)
5. PERFORMANCE DATA
5-1. Temperature Charts
Indoor air tem
p. 86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor air temp. 86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor air temp. 86°F (30°C)
80°F (27°C)
75°F (24°C)
24

Sanyo CM2472A Specifications

General

Brand	Sanyo
Model	CM2472A
Category	Air Conditioner
Language	English