1
Select programme position “6”.
11
Tuning of the Channels
2
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 10.)
3
Select “POSITION” with the Programme UP
or DOWN button.
This function can be utilized after Automatic
Tuning.
For example, to copy a TV channel on pro-
gramme position “2” onto programme position
“6”;
1
Select programme position “2” .
2
4
Select position “6” with the VOLUME + or
-
button.
5
Select “MEMORY” by pressing the
Progamme UP or DOWN button.
7
Press the MENU button to return to normal
TV display.
Channel Copy
6
Press the VOLUME + or
-
button to
memorize.
Channel Swapping
The two TV channels will now have changed
places.
Use this channel swapping feature to swap the
channels between two stored programme position.
This feature is particularly useful after automatic
tuning.
2
Press the SWAP button.
For example, to swap the channel between pro-
gramme position “6” and programme position
“12”.
6
12
SWAP 6 AND
-
3
Press the DIGIT button, “ 1 “ button and then
“ 2 ” button on the remote control to enter
programme number 12. (For example, to
enter programme number “ 3 “, press “ 3 ”
button only. )
SWAP 6 AND 12
6
12
4
Press the SWAP button.
12
SWAPPING
1
Enter to SEMI-AUTO or MANUAL tuning
mode. (Refer to page 10.)
2
Select “POSITION” with the Progamme UP
or DOWN button.
When there is a position you do not use, Position
4 for example, by setting the SKIP Channel func-
tion it is possible to jump over this position, when
you are selecting a channel using the Progamme
UP/DOWN or CHANNEL SCAN button.
3
4
5
Skip
For example, to set programme position “4” as
Skip channel ;
Skip Channel Set and Cancel
3
Press remote control “4” button to select pro-
gramme position 4. Use the DIGIT button
and Progamme Selector (Number buttons)
to enter programme number. Do not use the
VOLUME + or
-
button to enter programme
position in this settings.
To Next Page
Loading...
Need help?
General
