--
● If the operation of the unit or display is not normal,or you wish to
clear the contents of the memory.
1.
2.
3.
4.
Disconnect the power cord’s plug from the electrical outlet.
Press the RESET button for at least 30 seconds.
Connect the power cord.
Press the POWER button to turn the power on.
$
RESET
—-
b
BEFORE USE OR TRANSPORTATION
● Before use
1. Remove the shipping screws from the rear of the unit.
2. This screw is used to secure the CD mechanism during
shipment and should be retained for future use.
c Before transportation
1. Turn on the power and remove all discs from the unit.
2. Turn the POWER off. [STANDBYl lights.
3. Then unplug the power cord from the AC outlet.
4. Reinstall the shipping screw.
-2-
To Next Page
Loading...
Need help?
General
