22
CONNECTING AN AV RECEIVER TO THE DTV
DTV AUDIO OUT (DIGITAL) JACK
BACK VIEW OF DTV
COAXIAL CABLE
AV RECEIVER
No Sound or Poor Sound
Check external equipment
connections.
Switch on external equipment.
HELP HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
OPERATING TIP:
Refer to the owner’s
manual that came with
your external equip-
ment for connection
options.
AUDIO OUT
[For Stereo
Sound]
1
Connect a Coaxial Digital Audio cable from the
DTV Digital Audio Output jack to a Coaxial
Digital Audio In jack on an AV Receiver.
2
Connect an Audio cable from the DTV Audio
Out jacks to Audio In jacks on the AV
Receiver.
Note: Dolby® Digital 5.1 audio is available at the Digital
Audio Output only when received as part of a
Digital Antenna signal.
To Next Page
Loading...
Need help?
General
