Sanyo PLC XU115 - XGA LCD Projector Function Guide

8
Memory viewer function
Image viewer in the manual mode
1.Select "Manual mode"from"Menu" onthe browser window of thememory viewerand pressSELECT
button.
2.Select afile todisplaywithpointbuttons andpress SELECT button. The selected file image is
displayed on the screen.
3. During displaying the image, you can control the displayed image with control buttons as described
in the table below.
* The display time of the image and the number of repeat at the auto-playback mode are set up
from the "Set" menu on the browser window.
* Point 7 8 buttons operate as the scroll key during displaying the text file .
Note:
During operating the memory viewer, the Network Viewer and Network Capture function cannot be used.
The program file does not support in the manual mode. Use it in the program mode.
Point Operation
d Manual playback with next file
e Manual playback with previous file
8 Start auto-playback*
7 Stop auto-playback*
* To display the portrait documents such as text files, use the point 7 8 buttons to scroll up and down the page.

Sanyo PLC XU115 - XGA LCD Projector Specifications

General

Brand	Sanyo
Model	PLC XU115 - XGA LCD Projector
Category	Projector
Language	English