22 Capture Settings
The Capture Menu
English
M-Burst Interval
The M-Burst Interval setting allows you to adjust
the burst interval when the multi-burst function is
enabled.Use the Up/Down navigation buttons to
select from the options.
• 1/30 Sec (default)
• 1/15 Sec
• 1/7.5 Sec
White Balance
The White Balance setting allows you to adjust
the camera setting according to the ambient white
light when shooting. White balance represents the
degree of coolness of the light. If the light has a
yellowish or reddish tinge, it is said to be warm; if it
has a bluish tinge, it is said to be cool. You can
select the setting and preview it on screen before
confirming your choice. Use the Up/Down
navigation buttons to select from the options. Five
white balance settings are available:
• Auto (default)
• Sunny
• Tungsten
• Fluorescent
• Cloudy
ISO Speed
The ISO Speed setting allows you to adjust the
CCD light-sensitivity. Use the Up/Down navigation
buttons to select from the options. Seven ISO
settings are available:
• Auto (default)
•ISO 80
• ISO 100: For outdoor photography in bright
sunlight.
• ISO 200: For outdoor or indoor photography in
bright light.
• ISO 400: For indoor photography or low light environments.
• ISO 800: For moving object photography or low light environments without
using flash.
P-Mode only.
M-BURST INTERVAL
1/30 SEC
1/15 SEC
1/7.5 SEC
WHITE BALANCE
AUTO
SUNNY
TUNGSTEN
FLUORESCENT
CLOUDY
ISO SPEED
AUTO
ISO 80
ISO 100
ISO 200
ISO 400
AUTO
To Next Page
Loading...
Need help?
General
