Getting Started 17
Taking your First Photo
English
2. Press the lefts side of the Zoom switch to zoom out from your subject.
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after
a pre-defined delay. The burst photography feature allows you to take multiple con-
secutive photos by pressing and holding the Shutter button. The multi-burst pho-
tography feature allows you to take multiple (16) consecutive VGA photos by
pressing the Shutter button once.
To set the self-timer/burst mode:
1. Press the Right/Self-timer/Burst mode navigation button to cycle
through the self-timer( or ) and burst photography options ( or )
on the LCD screen.
2. Once you have selected an option, frame and take your shot. In self-timer
mode, the icon will flash until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use these
functions for the next photo, press the Right/Self-timer/Burst mode
navigation button again to activate the function.
Recording Voice Memos
You can add a 1-minute voice memo to an image right after it’s taken.
To record a voice memo:
1. Hold the Shutter button to start recording and release the Shutter button to
stop recording.
2. While recording, the selected image is shown on the LCD screen.
3. The elapsed time screen shows the length of a voice memo.
Note:
A Voice Memo can also be added in Playback mode.
To Next Page
Loading...
Need help?
General
