EN-17
Charging the Battery
The battery is not fully charged at the time of purchase. Fully charge the battery and
discharge it for at least one complete cycle before use to maximize its performance and
lifetime.
1. Connect camera to USB-AC adapter with USB cable.
2. Insert the plug into a wall outlet.
3. Select [Charge] with the c / d buttons, and press the SET button.
The included USB-AC adapter differs depending on the region where you purchased the camera.
User can also charge the battery by connecting camera to computer with USB cable.
Charging time varies according to the ambient temperature and the status of battery.
Status LED Description
Green (blinks slowly) Charging normally
Off Charging finished
Green (blinks quickly) Error
1
2
;
To Next Page
Loading...
Need help?
General
