EN-24
Taking and Combining Panoramic Pictures
Pictures are manually shot, and the camera automatically combines pictures in the
camera.
1. Press the MODE button, and set the camera mode to [ ], and press the SET
button.
2. Select [Panorama PanCapture] with the e / f / c / d buttons, and press the SET
button.
3. Select the photographic direction with the e / f buttons.
4. Shoot the first image.
The next image appears beside the previous image.
5. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture the
next image.
6. Follow the same steps to capture subsequent images in the sequence.
7. After the third picture is taken, the pictures are automatically combined.
Set to [Panorama PanCapture] image size will be 2M.
Mode of Skin Soften and De-blemish
In order to make face taken look better and younger, mode of Skin Soften is added to
reduce artifacts on faces, while mode of De-blemish is to reduce obvious blemishes and
big spots on faces.
1. Press the MODE button, and set the camera mode to [ ], and press the SET
button.
2. Select [Skin Soften] or [De-blemish] with the e / f / c / d buttons, and press the
SET button.
3. Compose the image, and press the shutter button down fully.
Photo Frame Function
Use this function to add suitable frame to your image and make it personalized.
1. Press the MODE button, and set the camera
mode to [ ], and press the SET button.
2. Select [Photo Frame] with the e / f / c / d
buttons, and press the SET button.
3. Select your favorite frame withe / f / c / d
buttons, and press the SET button.
4. Press the shutter button down fully to capture
your image.
To Next Page
Loading...
Need help?
General
