English 18
DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
hTo correct the date and time setting, please see under HINT on page 20.
Example: To set the clock to 7:30 p.m. on December 24, 2010
1 Turn on the camera (page 16), and
press the SET button.
h The Clock Set Screen appears.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To display the Recording or
Playback Screen, press the
MENU button 2 times.
2 Set the date.
1 Select “DATE”.
2 Press the SET button.
h The Set Date Screen appears.
3 Set the date to “2010/12/24”.
h The date is set in the following
order: Set the year → Set the
month → Set the day.
h Toggle the SET button left or
right to select year, month or
day.
Toggle the SET button up or
down to increase or decrease
the number.
4 Press the SET button.
SET
CLOCK SET
DATE
TIME
DISP
OK
2010/01/01
00:00
Y/M/D
SET
CLOCK SET
DATE
OK
2010/12/24
To Next Page
Loading...
Need help?
General
