4
CONTROL NAMES AND
LOCATIONS
FRONT
REMOTE CONTROL
POWER
Power Cord
VIDEO IN/
AUDIO IN (L/R)
JACKS
CHANNEL
(
DD
/
EE
)
PAUSE/
STILL
STOP/
EJECT
CASSETTE
COMPARTMENT
REC
REW
EJECT
TV/VCR
Ad JUMP
INPUT
SP/SLP
PAUSE
FF
STOP
MENU
ENTER
(CLK/COUNT)
CH(channel)/
TRACK(tracking)
FFPLAY
POWER
NUMBER buttons
SLOW
PLAY
REW
CLEAR
REC
DD EE FF GG
arrows
TV CONTROL
buttons
TV POWER, TV
INPUT, TV CH +
and TV CH – ,
VOL + and VOL –.
Remote
Sensor
ANT.INVIDEO IN/
AUDIO IN (L/R)
JACKS
VIDEO OUT/
AUDIO OUT (L/R)
JACKS
VCR OUTPUT CHANNEL
SELECT SWITCH
VHF/UHF/CATV
WARNING : Do not drop the tying
band of the power cord into the
unit. Doing so might cause a fire
or an electrical shock.
REAR
TAPE IN indicator TIMER indicatorPOWER indicator
VCR indicator
Use TV/VCR on the remote control to turn this
indicator ON or OFF.
ON: for playback, VCR programming or watching
TV programs through the VCR tuner.
OFF: for watching TV programs through TV tuner.
REC (Record)
indicator
INDICATOR PANEL
OPERATION OF REMOTE CONTROL
Aim the remote control unit at the sensor on the front panel of the
VCR.
HOW TO INSTALL THE BATTERIES
1
Slide the battery compartment
cover in the direction of arrow.
2 Insert 2 “AA”-size batteries in the
correct direction.
3 Replace the cover.
• The remote control will not operate properly if something
comes between the VCR and the remote control.
• If the range is short, try new batteries.
• An object between the VCR and remote control unit may block
the invisible light beam and operation will be impossible.
• Batteries installed backwards may leak and damage your
Remote Control.
• Do not mix old and new batteries or carbon types with alkaline
types.
• Remove the batteries from the battery compartment if the
remote control will not be used for a long time.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF IN A SAFE MANNER
IN COMPLIANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR
LOCAL COUNTY SOLID WASTE AUTHORITY.