91
English
EDITING VIDEO CLIPS
Procedure to join two video clips
Note
Caution when editing video clips
e When editing video clips, do not move the main switch. If you move the main
switch while editing video clips, not only will the editing not be properly
completed, but the original video clip may also be erased.
e By repeating the clipping and joining procedures, you can create exactly the
video clip you like. Note, however, that as the number or size of the video
clips increases, the card memory may become full, making it impossible to
edit the video clips. (The “CARD FULL” message will appear.) In this case,
you will need to free some of the memory on the card either by deleting data
that are no longer necessary (page 75), or by performing the procedure to
erase the original video clip(s) (page 94, 97).
Display the video clip that will come
first.
J
JJ
J
Select the video clip that you wish to
append (join).
J
JJ
J
Join the video clips. (Press the SET button.)
eThe two video clips are saved together as
a separate video clip.
eThe original video clip is not affected. (You
can also choose to erase the original video
clip when the new clip is saved.)
) !"#
To Next Page
Loading...
Need help?
General