Important notes before first use, installation and maintenance
Before use, carefully read the manual not only for the thermostat, but also for the Heating device (heat pump,
pumps, boilers, etc.) • Turn off the power supply before installing the thermostat! • We recommend that the
installation is done by a qualified electrician • the electrical circuit must be secured with a fuse that does not
exceed the current load of wiring • Please note all safety instructions before installing • Do not expose the product
to direct sunlight, extreme cold, humidity and sudden temperature changes. This would reduce the accuracy of
the temperature measurement • Do not place the product in places that are prone to vibrations and shocks - this
can cause damage • Do not expose the product to excessive pressure, shock, dust, high temperatures or
moisture, as these can cause damage to one of the functions product, shorter energy endurance, damage to
batteries, and deformation of plastic parts. • Do not expose the product to rain or moisture, dripping or spraying
water. • Do not place any sources of fire on the product, for example, spark plugs etc. • Do not place the product
in places where there is insufficient air circulation. • Do not insert any objects into the ventilation openings. • Do
not interfere with the internal electrical wiring of the product. It may be damaged and therefore terminate the
warranty. The product must only be repaired by a trained specialist. • Use a moderately moistened cloth for
cleaning. Do not use solutions or cleaning products - may damage plastic parts and electrical wiring • Do not
immerse the product in water or other liquids. • Do not repair it yourself if the product is damaged or defective. Put
it in the repair shop where you bought it • The product should not be used by a person (including children) by
physical, sensory or mental disability or lack of experience and knowledge impeded by the safe use of the device
if they are not controlled, or if they were not informed by the person responsible for their safety about the use of
the device • Children's control is necessary to ensure that they do not play with the device.
Declaration of conformity has been issued for the product. The device can be freely used in the EU. This and
other documentation (RoHS, CE, …) is freely available on the website www.sen-controls.eu and or subsites e.g.
en.sen-controls.eu under tab “Pravno”, “Dokumenti “Legal, Documents” or similar at each published product..
Manufacturer of this product is SASWELL CONTROLS (HONGKONG) LTD. Importer, distributor and service for
Saswell is Sen Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia
Before use read the user manual! All of the installation should be done by a qualified
technician. Warranty and warranty statement is located on the last page of this manual.
Environmental protection
Do not place electronic devices and batteries after the end of their life in mixed
municipal waste - use collection points of separate waste. By properly removing the product, you will
prevent negative effects on human health and the environment. Recycling of materials contributes to the
protection of natural resources. More information on the recycling of this product is offered to you by
administrative units, household waste treatment organizations or the point of sale where you purchased
the product.
Batteries
Thermostat unit is powered by 4 alkaline batteries LR03 1.5V. The battery life is on average 1 year.
Lifespan of the batteries vary from the frequency of use and battery quality. Always use Alkaline
batteries and not rechargeable ones! When inserting the batteries in the thermostat, check that you use
the correct polarity. After you change the batteries, put the old ones in an trash bin that's ment for old
and used batteries - recycling!
Thermostat mode description and internet , work mode
To use this thermostat, you don't need internet connection and it can work as a wireless RF
thermostat. You can set the heating schedule via the app when you're in proximity of the thermostat via
WIFI direct connection. This mode is an option and mostly used as test and debugging solution.
WIFI devices (routers)
Receiver and the whole thermostat kit is compatible with mostly all of the wireless routers. In case that
you occur problems connecting the device to your wireless router, try connecting it to some other
model. Also, contact us and let us know if you have any problems on support@sen-controls.eu. Before
connecting the thermostat to your network, make sure it's password has no special signs inside!
The device DOES NOT support 5GHz wireless networks!
When connecting and using the app, have your location (GPS) function activated on your mobile device.
To Next Page
Loading...
Need help?
General
