www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
GB
•
Contact with electrical lines can re
Damage to a gas
line can lead to an explosion. Penetrating a water
electric shock.
•
It is safer to guide the electri
cal tool with two hands.
• Secure the workpiece. A workpiece held with a
•
Other safety and working instructions
WARNING
• Avoid abnormal posture.
•
goggles when working with the machine. Protec
tive clothing such as a dust protection mask, pro
• Dust generated when working is often harmful to
extraction and also wear a suitable dust protec
tion mask.
vacuum up.
•
machine’s operating area.
•
must not be processed.
•
•
the insertion tool is blocked! Do not switch the
device on again while the tool attachment is
a high torque reaction. Determine and rem
Possible causes for this can be:
• Jamming of the workpiece to be machined
• Breaking through the material to be processed
• Overloading of the electrical tool
• Do not reach into the machine while it is running.
• Chips or fragments must not be removed while the
machine is running.
WARNING! Danger of burning
The tool attachment can become hot during use.
• During a tool change
•
If dust extraction and collection devices can be
4. Using and handling the electric tool
Do not overload the device.
The suitable electric tool
indicated power range.
Do not use an electric tool whose switch is defec
tive. An electric tool that cannot be switched on or
These
Keep unused electric tools out of the reach of chil
dren. Do not let people use the device who are not
familiar with it or who have not read these instruc
tions.
Check wheth
stuck and whether parts are broken or are dam
function.
using the device.
Care
edges seize up less often and are easier to guide.
according to these instructions. Take the working
consideration.
other than the intended uses can lead to danger
ous situations.
5. Service
This
tained.
Device-specic safety instructions for hammers
• Excessive noise can re
sult in a loss of hearing.
•
the electric tool. Loss of control can lead to inju
ries.
•
tachment can meet with concealed power lines or
lated gripping surfaces. Contact with a live power
to an electric shock.
To Next Page
Loading...
Need help?
General
