www.scheppach.com
20
|
GB
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 2)
1. Tank cover
2. Fuel gauge
3. Choke
4. Petrol shut-o valve
5. Filter cover
6. Pull cable starter
7. Grip screw
8. Transport handle
9. On/o switch
10. Oil ller cap with dipstick
11. 230 V socket (2x)
12. Earthing screw
13. Disconnector
14. Support feet
15. Transport wheels
16. Exhaust pipe
17. Motor
18. Tank
19. Frame
3. Scope of delivery
A. Transport handle
B. Transport wheels
C. Wheel axle (Ø10x97mm) + Washer (2x)
D. Spring split pin (2x)
E. Hexagon screw M8x45mm + Nut M8 (3x)
F. Hexagon screw M8x40mm + Nut M8 (2x)
G. Generators
H. Support feet (2x)
4. Proper use
The machine may only be used in the intended manner.
Any use beyond this is improper.
The user/operator, not the manufacturer, is responsible
for damages or injuries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
To Next Page
Loading...
Need help?
General
