Schlage BE489WB User Manual

Manual Programming Guide
CAUTION
Manual programming is disabled after your lock is programmed using the mobile app. If you
manually program your lock and choose to later link your lock to the app, all manually programmed
user codes and the programming code are deleted.
Add or Delete User Codes
Enter 6 digit
Programming
Code
Choose and
press:
or
Enter
user code
to
add or delete
Re-enter
user code to
conrm
1 2
light on
4
add/delete another
user code
3
Press to exit
5
indicates
success
add
delete
Change Programming Code
Enter 6 digit
Programming
Code
Enter current
Programming
Code
again
Re-enter new
Programming
Code
to conrm
1 2
light on
4
Enter
new
Programming
Code
3
Press to exit
5
indicates
success
Change User Code Length
indicates
success
CAUTION
Changing the user
code length will
delete all codes
currently in the
lock.
Enter 6 digit
Programming
Code
Choose the
code length
(from 4 - 8 digits)
and press
and hold that
number.
Success!
User code
length has
been changed!
1 2
light on
5
While you’re
holding the
number
Press
3
conrm
cancel
Release then
choose:
or
4
Delete All Codes
CAUTION
You cannot
recover deleted
user codes! Make
sure you have
your default
codes available!
Enter 6 digit
Programming
Code
Press and hold:
Success! All codes
are deleted. See
the sticker on the
back of the Quick
Start Guide or the
back of the inside
escutcheon for
your default codes.
1 2
light on
5
While you’re
holding
Press
3
conrm
cancel
Release then
choose:
or
4
indicates
success

Schlage BE489WB Specifications

General

Brand	Schlage
Model	BE489WB
Category	Locks
Language	English