SCHOTT Termofrost
®
SCHOTT Termofrost
®
Page 11
Ensure that...
All cabinets are properly cleaned after the installation and no metal span can be found inside or outside the
cabinet
All glass doors have been cleaned with a suitable glass clear (e.g. Nano Cleaner from Schott)
Doors are closing automatically via the gravity system
Frames are properly aligned
Doors are adjusted properly in the frame and screws are tightened
Adapters are properly fixed to the cabinet and no movement can be found between adapters and cabinets
The adapters are properly fixed with the frames
The sides of the cabinets are properly closed with the delivered finishing materials (corners and plastic plates)
Distance between stop pin and hinge plate is min 3 mm to guarantee a proper door stop function
For T.AGD3: Open 2 doors which are next to each and assure, that they do not touch each other (see picture
below)
6. Control of installation
To Next Page
Loading...
Need help?
General