SCHOTT Termofrost
®
SCHOTT Termofrost
®
Page 4
3. Recommended tools and accessories for the installation
These parts are NOT part of the delivery
Name Illustration
Hexagon Wrench 4 mm
Measuring tape
Rivets Alu Ø4,8x10 (4 rivets per system)
Rivets Alu Ø4,8x25 (8 rivets per system)
Rivets Alu Ø3x10 (6 rivets per line)
Self drilling screws Ø4,8x30 (3 screws per system)
Self drilling screws Ø3,9x15 (3 screws per system)
Riveter (electrical if possible!)
Drilling machine
Water level with electronic display
Angle grinder
Metal saw
Classical tool box with hammer, cutter, file, etc.
Ladders (the height of the cabinets is approx. 2,20m)
Cleaning sponges and glass cleaner
Hoover for cleaning the cabinets (-> metal spans !)
Important Remark: Screws are not recommended by Schott but can be used in some particular cases!
To Next Page
Loading...
Need help?
General