Sharp 32C530 User Manual

•
Part Names
Fr ont P anel
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic mater ial, so it is safe to use.
• The degree of illumination will var y depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Contr ol Functions
IN 2
VIDEO L-AUDIO-R
(INSIDE DOOR)
CHANNEL UP/DOWN
(8 ) Selects next higher
channel.
(9 ) Selects next lower
channel.
• Press both at the same
time to access the MAIN
MENU screen.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
Press On.
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
1 2 3
4 5 6
7 8 9
0 100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHB ACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your fa vorite
programs b y using the 4 categories A,
B, C and D . The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
• Tempor ar ily displa ys receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to exter nal video
INPUT 1 mode.
Press 2 times
Switch to external video
INPUT
2 mode.
Press 3 times Switch to external video
INPUT 3 mode or COMPONENT mode.
Press 4 times Switch back to the
original TV mode.
ENTER
Used in some instances where a Cable
Con ver ter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button.
CHANNEL UP/DOWN
(8 ) Selects next higher channel.
(9 ) Selects next lower channel.
• See pages 28 ~ 30 for channel
presetting.
• Moves the “ [ ” mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
• CLOSED CAPTION appears when
sound is muted.
32C530
LOCATION OF USER'S CONTROL
4

Sharp 32C530 Specifications

General

Brand	Sharp
Model	32C530
Category	CRT TV
Language	English