- 38 -
Maintaining the Waterproof and Dustproof
Properties
Rubber seal
The rubber seal on the SIM card/microSD memory card tray is important
to maintain the waterproof/dustproof property. Be sure to observe the
following items.
•
Do not remove or scratch it.
•
When closing the SIM card/microSD memory card tray, do not get the
rubber seal caught. Also, do not insert sharp objects into gaps around
the SIM card/microSD memory card tray, the earphone/microphone
jack or external connection jack section.
Doing so may damage the rubber seal and cause liquid or dust to get
inside.
•
It is recommended to replace the parts for maintaining the waterproof/
dustproof property (pay service) once every two years regardless of
whether any abnormality is present. For information on part
replacement, contact au Style/au shop near you.
Precautions on Charging
Specified charger (sold separately) and optional accessories are not
waterproof/dustproof. Be sure to check the following items before and
after charging.
•
Check that there are no water drops or foreign objects on the product.
If foreign objects are attached on the product, immediately wash it
away. Also, if it is wet or after it gets wet, drain water well and wipe
remaining water off with a clean dry cloth etc. before inserting the USB
Type-C plug into the external connection jack.
•
Never connect the USB Type-C plug when the product or charger is
wet or foreign objects are attached to it.
Although the product is water/dust resistant, the specified charger
(sold separately) and optional accessories are not water/dust resistant.
Any water or foreign matter on the product or USB Type-C plug when
inserting the USB Type-C plug while the product is wet or dirty might
cause electric shock or short circuit/corrosion causing abnormal
overheating, burnout, fire, burns, or a fault.
•
Do not touch the specified charger (sold separately) with wet hands.
Doing so may cause electric shock.
To Next Page
Loading...
Need help?
General
