Sharp AX-1100 User Manual

EN – 4
INSTALLATION
4. Place or mount the oven so that the bottom of
the oven is 85 cm or more above the floor.
5. Do not allow the power supply cord to run
over any hot or sharp surfaces, such as the
hot air vent area at the bottom of the oven.
6. Ensure there is a minimum of free space above
the oven of 12 cm.
7. Securely connect the plug of the oven to
a standard earthed (grounded) household
electrical outlet.
1. Remove all packing materials from the inside
of the oven cavity. Discard the loose polythene
sheet from between the door and cavity.
Remove the feature sticker, if attached, from the
outside of the door.
2. Check the oven carefully for any signs of
damage.
3. Place the oven on a flat, level surface strong
enough to support the oven’s weight plus the
heaviest item likely to be cooked.
This oven is designed for countertop use only.
Steam is ventilated from the bottom of the oven.
Make sure the escaping steam does not wet
electrical outlets/other electrical appliances.
AX1100eng.indd4AX1100eng.indd4 10.11.122:07:35PM10.11.122:07:35PM

Sharp AX-1100 Specifications

General

Brand	Sharp
Model	AX-1100
Category	Microwave Oven
Language	English