5
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Touch Control Panel Layout
Control Panel Display
Indicator
HEALTHY MENU PADS
Press to select "Healthy Menu"
menu.
POWER LEVEL PAD
Press to select microwave power
setting.
If not pressed, 100% power is auto-
matically selected.
NUMBER PADS
Press to enter cooking times, clock
time, weight or quantity of food.
STOP/CLEAR PAD
Press to clear during programming.
Press once to stop operation of
oven during cooking; press twice to
cancel cooking programme.
EXPRESS MENUS PADS
Press to select "Express Menus"
menus.
QUICK AND EASY PAD
Press to select Quick and Easy
menus.
EASY DEFROST PAD
Press to defrost frozen food by en-
tering quantity.
MORE, LESS PADS
Press to increase/decrease the
time in one minute increments dur-
ing cooking or to alter the cooking
result for the automatic operations.
INSTANT COOK/START PAD
Press once to cook for 1 minute on
HIGH or increase by 1 minute mul-
tiples each time this pad is pressed
during cooking. Press to start oven
after setting programmes.
SENSOR REHEAT PAD
Press to select a reheat menu.
HELP PAD
Press to select auto start, child lock,
demonstration modes or info on pads.
Press to get cooking information.
TIMER/CLOCK PAD
Press to set Timer and Clock.
SENSOR COOK PADS
Press to select Sensor Cook menus.
SCA/SCNZ R380L,O/M,P05- 06.11.22, 1:56 PM5
To Next Page
Loading...
Need help?
General
