7
Step
Procedure Pad Order Display
1
Clock Setting
Step
Procedure Pad Order Display
Press the INFO/TIMER pad and the
number 3.
* To enter the present time of day 11:34 (AM or PM).
BEFORE OPERATING
Enter the correct time of day by
pressing the numbers in sequence.
2
3
Getting Started
2
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45), will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/CLEAR pad twice.
Stop/Clear
To Cancel a Programme During Cooking
The dots (:) will flash on and off.
Press the STOP/CLEAR pad.
Plug the oven into a power point and
switch on the power.
Ensure the oven door is closed.
1
* This oven is preset with the INFORMATION GUIDE.
To assist you in operating your oven, useful information will appear on the display.
In this manual, the display information guide is abbreviated.
STOP
CLEAR
INFO
TIMER
INSTANT COOK
START
Press the INSTANT COOK/START
pad.
SCA/SCNZ R395Y O/M,P06-10 11.5.23, 5:06 PM7
To Next Page
Loading...
Need help?
General
