EasyManuals Logo
Home>Sharp>Monitor>EP-C131

Sharp EP-C131 User Manual

Sharp EP-C131
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8
E

Supported formats
The types of files that can be played are as follows.
(Not all files are guaranteed to be played back.)
Extension
Max. resolution
EP-C251 EP-C131
*.jpeg (*.jpg)
8192×4608 8192×6144*.bmp
*.png

Send a display image to this monitor
1. Create a "Slideshow” folder for the USB flash drive (commercially available) root folder.
2. Save the images to display on this monitor in the "Slideshow” folder.
You can also send multiple images.
3. Connect the power source for this monitor.
4. Connect the USB flash drive with the saved image to the Computer/USB flash drive connection terminal.
Computer/USB flash drive
connection terminal
The USB flash drive image will be sent to this monitor.
Images on displayed on this monitor will be replaced by images on the USB flash drive.
The indicator will flash red while the USB flash drive is being accessed.
5. Check that the indicator is not flashing once the transfer has finished, and remove the USB flash drive.

How to change the display image
There is a Manual Mode and an Automatic Mode.
How to change the mode: each time you press and hold the MODE button (for approx. 3 seconds), the mode will change.
Manual Mode:
The following image will be displayed when you press the MODE button.
It will return to the initial image when the final image is displayed.
Connect to a power source when changing an image.
Automatic Mode:
The following image will be displayed automatically.
It will return to the initial image after the final image is displayed.
Playback will pause/resume each time you press the MODE button.
Make sure to connect to a power source during Automatic Mode.
TIP
Changing the display image will take approx. 30 seconds. During this time, colors may flash on the screen, and this is not a
malfunction.
The image change interval is 10 minutes. (Factory setting. The interval time includes the image change time. The image
display time will be approx. 30 seconds shorter.)
You can change the interval for changing images with the Electronic Paper Display Settings Tool.
Change display image

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp EP-C131 and is the answer not in the manual?

Sharp EP-C131 Specifications

General IconGeneral
BrandSharp
ModelEP-C131
CategoryMonitor
LanguageEnglish

Related product manuals