EasyManuals Logo
Home>Sharp>Receiver>FV-DB1E

Sharp FV-DB1E User Manual

Sharp FV-DB1E
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
FV-DB1E
04/4/12 FV-DB1E_2.fm
TINSEA025SJZZ
Advanced Features
Storing stations
! Memorising a station
You can store up to 20 DAB and FM stations (5 stations for each
zone A-D) and recall them at the press of a button.
For FM stations, stereo and mono modes are memorised.
Note:
If memory batteries are not inserted or low, preset stations will be
lost. When the AC adaptor is connected, preset stations remain
without memory batteries. Preset stations will be lost if the unit is
powered only by the main batteries and set to the power stand-by
mode.
! To recall a memorised station
Note:
If the selected preset number is empty the display shows
"Preset ** empty".
! To erase entire preset memory
1 Tune in to the desired station (see page 9, 13).
2 Press the PRESET SELECT button repeatedly to select the
desired preset zone.
Zone A
Zone B
Zone C
Zone D
3 Hold down the PRESET button (1 - 5) for
2 seconds or more to store the station
in memory.
4 Repeat steps 1 - 3 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
1 Press the PRESET SELECT button repeatedly to select the
desired preset zone.
2 Press the PRESET button (1 - 5) for less
than 1 second to recall a station.
1 Hold down the PRESET SELECT button
for 2 seconds or more.
2 Within 30 seconds, press the ENTER
button.
Downloaded from: http://www.usersmanualguide.com/

Other manuals for Sharp FV-DB1E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp FV-DB1E and is the answer not in the manual?

Sharp FV-DB1E Specifications

General IconGeneral
BrandSharp
ModelFV-DB1E
CategoryReceiver
LanguageEnglish

Related product manuals