NOTE
• The menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
• Items in darker grey cannot be selected.
Menu operation
1
3
2
What is the menu?
• You need to call up the OSD to perform settings for the TV. The OSD for the settings is called menu.
• The menu enables various settings and adjustments.
• The menu can be operated with the remote control unit and with the TV panel control keys.
Common operations
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
Picture mode User Eco
Picture mode User
Backlight 50
Contrast 50
Backlight 50
This function is useful when there is no
remote control unit within your reach.
1 Press MENU and the “PICTURE”
screen displays.
2 Press Pr/s instead of a/b or
ik/l instead of c/d to select
the item.
3 Press b to complete the setting.
NOTE
• The “PICTURE” screen will disappear if left unattended for
several seconds.
18
Display the menu
screen
Exit the menu
screen
Select an item
Press MENU and the “PICTURE”
screen displays.
The operation will exit the menu
screen if you press END before it is
completed.
Press a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
Press MENU to return to the previous
page.
E Selecting in the menu
E Selecting options
PICTURE
Picture mode User
Backlight 50
Contrast 50
Brightness 50
Colour 50
Sharpness 60
END MENU OK
END MENU OK
To Next Page
Loading...
Need help?
General