Connecting external devices
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set�
The CI Module and the CA Card are not supplied
accessories� They are usually available from your dealer�
Inserting the CA Card into the CI Module
With the side with the gold coloured contact chip
1.
facing the side of the CI Module marked with
the provider’s logo, push the CA Card into the CI
Module as far as it will go. Note the direction of
the arrow printed on the CA card.
Inserting the CI Module in the CI slot2.
Carefully insert the CI Module in the CI slot 3.
with the contact side
forward. The logo on
the CI Module must be
facing forward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
Access CI Module service
After inserting and activating the CI Module,
make sure the input source is TV�
Press
1. MENU on the remote control.
Go to
2. Features > Common interface.
This menu option is only available if the CI Module is
correctly inserted and activated� On-screen applications
and content are provided by your digital TV service
operator�
Inserting a CA Card
15
To Next Page
Loading...
Need help?
General