EasyManuals Logo
Home>Sharp>TV>LC-32CHE6242E

Sharp LC-32CHE6242E User Manual

Sharp LC-32CHE6242E
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
EN
View the next day by pressing BLUE. [INFO] shows detailed
information about the selected post
3. Press
[EXIT] to exit the 7 day TV Guide.
* - only for models with recording function
USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in
Digital mode when used in conjunction with acompatible USB memory
stick or USB Hard drive. The bene ts of this are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV).
One button record, if you decide you want to record the current
programme.
Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use ahigh speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Speci cation - USB Memory Stick
Read Speed - 20 MB/s(Mega Byte Per Second)
Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift) *
Pausing Live TV is very simple.
Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
Press fast forward to go forward in arecording (i.e. to skip adverts).
Press fast rewind to go back in arecording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function

Other manuals for Sharp LC-32CHE6242E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32CHE6242E and is the answer not in the manual?

Sharp LC-32CHE6242E Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal32 \
Display brightness300 cd/m²
Display resolution1366 x 768 pixels
Native aspect ratio16:9
Contrast ratio (dynamic)1000000:1
Display diagonal (metric)81 cm
Motion interpolation frequency400 Hz
Motion interpolation technologyActive Motion 400
3DNo
Power consumption (average)31 W
Tuner typeAnalog & digital
Analog signal format systemPAL, SECAM
Digital signal format systemDVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video appsYouTube
Internet TV-
Lifestyle appsFacebook, Twitter
Audio decodersDTS, Dolby Digital
RMS rated power16 W
Number of speakers2
HDMI ports quantity3
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Consumer Electronics Control (CEC)Aquos Net+
Product colorBlack
Panel mounting interface400 x 200 mm
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (max)70 W
Power consumption (standby)0.5 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)168 mm
Height (with stand)461.3 mm
Weight (with stand)4500 g
Depth (without stand)68.3 mm
Width (without stand)728.3 mm
Height (without stand)425.9 mm
Weight (without stand)4300 g

Related product manuals