Sharp LC-32HI5232E Service Manual

68
10. HOTEL MODE
Description:
The Hotel mode and Lock mode share some common functions. Hotel mode can use the Lock
mode functions and also other specic functions for Hotels.
How to enter in Hotel mode:
There are 2 ways to enter in Hotel mode:
1. Press MENU + 7906
2. Enter in MENU -> SETTINGS -> LOCK -> Hotel Mode
Entering using way 1) drives to Hotel mode functions, available by advanced users. These
functions should be modied by technical sta.
Entering using way 2) needs to use a password. By default the “Lock” password is “0000” and
can be changed later. After allowing the “System Lock”, the “Hotel mode” item is available is this
menu. Hotel Mode is protected by “7906” password, it cannot be changed.
Lock Mode functions:
It is important to understand that Lock mode functions can be combined with the Hotel Mode
functions. Let’s start the Lock Mode functions description rst:
OPTIONS:
1. System Lock [ON/OFF]
2. Set Password [4 digits entry]
3. Channel lock [Green key to lock/unlock channels in the channel list]
4. Parental Guidance [4 .. 18 years and OFF options]
5. Key lock [Full – Partial – OFF]
6. Source Lock [Satellite, ATV, AV, Scart, YPbPr, VGA/PC, HDMI1…HDMI3]
7. Hotel Mode [Option to enter in Hotel mode from Lock Menu]
System Lock: This option enables or disables the lock options
2 to 7, it must be ON to set any of them.
Set Password: This option allows the change password for Lock mode.
Channel lock: This function allows to lock by password any channel in the channel list. To
watch the locked channel, it is necessary to enter the same password set in Lock mode.
Parental Guidance: This function checks the Transport Stream parental control
data and allows to watch the lm if the age threshold set in the menu is higher than
the age threshold sent by the transport stream. If it is OFF, no limitation is set.
Key lock: This function will lock the local keypad totally (all keys disabled) or partially
(on/o key working, rest of keys disabled). OFF means all local keypad keys enabled.
Source Lock: This function will lock the selected source(s).
Hotel Mode: This function enters in Hotel mode after entering the password “7906”
Hotel Mode functions:
Once we entered in Hotel Mode we nd the following functions:
1. Hotel Mode [ON/OFF]
2. Default Source [DTV, Satellite, ATV, AV, Scart, YPbPr, VGA/PC, HDMI1…HDMI3]
3. DTV Channel Type [Digital TV / Radio]
4. Default Prog [Program number]
5. Default Volume [0..100]
6. Max Volume [0..100]

Sharp LC-32HI5232E Specifications

General

Brand	Sharp
Model	LC-32HI5232E
Category	TV
Language	English