9
Picture menu (Continued)
NOTE
• You can also select an item by pressing WIDE on the remote control
unit.
• Some picture sizes may not be displayable depending on the input
signal.
• “Auto”, “16:9”, “4:3” and “Just scan” can be selected only during
video playback in “Movie mode” of USB Media Player.
• For resetting all “Picture adjust” items to factory preset values, press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to select “Yes”,
and then press ENTER.
Audio menu
H
Sound adjust
Selected item
c
button
d
button
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
H
SRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the same as
you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from the
“Audio” setting.
Selected item
Description
On
SRS TruSurround HD™ creates a high quality
surround sound experience, when watching
DVD movies and TV programmes broadcast in
surround sound.
Off
Outputs the normal sound.
H
Bass enhancer
powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced sound
.
Selected item
Description
On
Bass enhancer function is on.
Off
Outputs the normal sound.
H
Clear voice
This function emphasises speech against background noise for
greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
• For resetting all “Sound adjust” items to the factory preset values,
press
a/b
to select “Reset”, press ENTER, press
a/b
to select
“Yes”, and then press ENTER.
ECO menu
H
No signal off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving no
programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining time
displays every minute.
NOTE
• When a TV programme fi nishes, and the TV receives signal input,
this function may not operate.
H
No operation off
You can set the TV to automatically power off when no TV
operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining time
displays every minute.
Setup menu
H
Child lock (TV input mode only)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
1
Repeat steps 1 and 2 in Menu operation.
2
Press
a
/
b
to select “Child lock”, and then press
ENTER.
3
If you have already set the password, enter it here.
4
Press
a
/
b
to select “Change password”, and then
press ENTER.
5
Enter the 4-digit number as a password using 0 — 9.
6
Enter the same 4-digit number as in step 5 to confi rm.
NOTE
• To view a locked channel, you must enter a password. When you
select a locked channel, “Child lock has been activated” is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allows you to clear your password.
1
Repeat steps 1 to 3 in Setting a password.
2
Press
a
/
b
to select “Clear password”, and then
press ENTER.
3
Press
c
/
d
to select “Yes”, and then press ENTER.
H
HDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use the Auto Selection
of WIDE MODE based on signal recognition
received from the HDMI signal.
H
Link operation
Using the HDMI CEC (Consumer Electronics Control)
protocol, with Link operation you can interactively operate
compatible system equipment (e.g. DVD), by connecting the
link operation-compatible devices with HDMI-certifi ed cables
to the TV.
Link operation allows you to operate the HDMI-connected
equipment and the TV by using a single remote control unit.
(On, Off)
LC32LE355M_EN_A5.indd 9LC32LE355M_EN_A5.indd 9 6/24/2013 3:29:14 PM6/24/2013 3:29:14 PM
To Next Page
Loading...
Need help?
General