13
Connecting to External Equipment
HDMI Connection
AUDIODVI OUT
HDMI OUT
HDMI-certifi ed cable
HDMI-DVI conversion cable
INPUT 5, 6, 7 or 8
INPUT 6
Ø 3.5 mm stereo minijack cable
When using HDMI-DVI
conversion cable:
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
When you input the audio signal via the AUDIO terminal with INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 40.)
• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certifi ed cable and set the equipment to 1080p output.
Connecting a Speaker/Amplifi er
DIGITAL AUDIO INPUT
OPTICAL
ANALOG AUDIO IN
AUDIO-L (White)
AUDIO-R (Red)
Audio cable
Optical fi ber cable
OUTPUT
DIGITAL AUDIO OUT PUT
Amplifi er with
analog audio input
Amplifi er with
digital audio input
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio
outputs from the terminal.
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
To Next Page
Loading...
Need help?
General