Sharp LC-50LB261U User Manual

53
LC-50LB261U Sharp 50" LED TV
www.sharpusa.com
• Digital Audio Output—Sends digital audio to
an external audio system. You can select:
• Audio Format— Selects how the digital
audio is sent to the external audio system.
You can select:
• Dolby Digital—Outputs the original
digital audio sound.
• PCM—Outputs audio in 2-channel
stereo.
• Audio Delay—Fine tunes the audio when it
is not in sync with the video.
• Analog TV Sound—(Analog channels only)
Selects the audio mode. You can select:
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if available.
• Headphones/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system, or
a sound bar. When a device is connected to the
/AUDIO OUT jack, the TV speakers are muted.
You can select:
• Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
the headphones, home theater system,
sound bar, or external speaker system you
connected to the /AUDIO OUT jack.
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system, sound bar, or external
speaker system you connected to the
/AUDIO OUT jack to control the audio.
This option is only available when a device is
connected to the /AUDIO OUT jack.
• Reset Sound Settings—Reset all audio settings
to factory defaults.
4 Press
W or X to adjust the option, or press S or T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the
/AUDIO OUT jack on the side of your TV. The
following screen opens.
2 Press
W or X to highlight the audio out mode you
want to use, then press ENTER. You can select:
• Headphones/Audio Out Variable—Select this
option to use the remote control that came with
your TV to control the audio from the
headphones, home theater system, sound bar,
or external speaker system you connected to the
/AUDIO OUT jack.
• Audio Out Fixed—Select this option to use the
remote control that came with the home theater
system, sound bar, or external speaker system
you connected to the /AUDIO OUT jack to
control the audio.
Note
You can also press AUDIO one
or more times to select the
audio mode.

Sharp LC-50LB261U Specifications

General

Brand	Sharp
Model	LC-50LB261U
Category	LED TV
Language	English