Sharp LC-65LBU591C - Connecting to a Network Router

27
LC-43LBU591U / LC-50LBU591U / LC-55LBU591U / LC-65LBU591U
LC-43LBU591C / LC-50LBU591C / LC-55LBU591C / LC-65LBU591C
Connecting a network router
You can connect your TV to a network router using an Ethernet cable and the ETHERNET jack on your TV.
1 Make sure that your TV’s power cord is unplugged and the router is turned off.
2 Connect an Ethernet cable (not provided) to the ETHERNET jack on your TV and to an Ethernet jack on the router.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 During Guided Setup, select Wired (Ethernet) > Connect to wired network to use your wired connection to access the
Internet and your Roku account.
Ethernet cable
Network router
Ethernet
cable
connector
ETHERNET jack
On your TV
43"/50"/55" models
55" model shown
65" model